How to Deal With The Problem Of Degumming And Bursting Of Industrial Casters?
As you use industrial casters, they will eventually degum and burst. It’s very important to ensure that you understa...
We want to teach you what is the conductive castor, where it can be used and also what things you need to focus on while using it.
Just like its name states, the conductive castor is basically an energy-conducting castor. You can use this as a way to conduct current betw...
During these times we have technology moving at a rapid pace, and we do experience a large variety of low speed push carts being brought to the market. That’s why we get to see more and more foam and pneumatic wheels, all of which ...
The plastic material is classified as a thermosetting plastic raw material. The plastic castors, what we often refer to, are produced by plastic materials, which are relatively cheap to produce, but have a poor load capacity and poor wear resistance. And they are normall...
1.Fashion Style:
The transparent castors have a delicate and fashionable appearance, which can become an unexpected little embellishment in life, and is also suitable for places with gorgeous decoration.
2.Noise Reduction:
Transparent castors are popular choices in bus...
The development of castors has a long history, and it is difficult to trace its origin. But it is certain that after people invented the wheel, it has become much easier to carry and move objects. However, the wheels can only run in a straight ...
1. Decide the composition of castor: Consideration on the size of road, obstacles, remaining substances on application area (such as iron scraps, grease), surrounding conditions (such as high temperature, normal temperature or low temperature) as well as the load capacity of castor should be tak...
Choosing a proper castor holder is a spare part, which installed under the transportation conveyance, with classification including fixed, swivel, swivel with brake, hole-topped and hole-topped with brake etc.
1. Load of castor should be firstly considered in selection. For example, for supermar...
1. Thread guard: prevent the obstacle twisting the clearance between wheel and holder.
2. Dust ring: prevent dust out of the bearing.
3. Direction lock: lock bearing direction, swivel state changes into fixed state.
4. Single brake: pause castor movement.
5. Double brake: lock bearing direction ...
1. Please make sure to use the same series of castor to assemble.
2. The wheel axle must be perpendicular to the ground to avoid putting more pressure on the wheel when using.
3. It is necessary to be designed in advance for the uses, loads and positions before the production of castors or choos...
Before using the castors hope to consider its usage, required functions, and usage condition, and then select the appropriate type. And please pay attention to the following:
1. Appropriate load bearing
The possible load bearing in the product introduction refers to the general load bearing that...
In daily life, any appliance is regularly maintained and repaired during use, which can effectively ensure its service life. As a frequently moving part of furniture, furniture castors often bear the overall gravity of the furniture, so the maintenance of furniture castors has become the importa...
